Datalogic DS4300 Manuel d'installation télécharger pdf (Page 19)

DS4300 DATALOGIC

2.4

- Installation

The junction box is designed to be mounted to a panel of metal, plastic or

other appropriate material using the mounting screws provided in the

package. To do this:

1) Open the junction box by unscrewing the 4 cover screws.

If necessary, using the two mounting holes inside the junction box as a

pattern, mark the panel with an appropriate object and then drill two small

pilot holes in the panel.

2) Align the junction box and insert the two self-threading screws with their

washers and screw them into the panel until tight (see Figure 2.5).

Figure 2.5 - Junction box mounting

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 52 53

Pas de commentaire

Datalogic DS4300 Manuel d'installation Page 19