Datalogic M-Series Manuel d'instructions télécharger pdf (Page 94)

Output Wiring M-Series Processor and Camera Guide

Datalogic Automation, Inc. 4-4

Output Wiring

The diagrams below show internal circuit diagrams and how to wire processor outputs.

General Purpose Output Circuit (Sinking)

NOTES: To prevent output damage, all inductive loads must have noise suppressors connected directly across the load, as

close to the load as possible.

The Output +5 to +35 VCC terminal is not an output voltage source. An external power source must be connected to it.

This is not an output voltage source. An

external power source must be con-

nected to VCC, as indicated.

Output +5 to +35 VCC is not an

output voltage source. An exter-

nal power source must be con-

nected to VDD, as indicated.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 133 134

Pas de commentaire

Datalogic M-Series Manuel d'instructions Page 94