Datalogic M-Series Manuel d'instructions télécharger pdf (Page 23)

M-Series Processor and Camera Guide MX20 and MX40 Processor Power Supply Connection

2-9 Datalogic Automation, Inc.

MX20 and MX40 Processor Power Supply Connection

Warning: To avoid electrical shock, disconnect all power to the power supply before working on it.

Avertissement: Pour éviter le choc électrique, débranchez toute la puissance à l'alimentation d'énergie avant de tra-

vailler à lui.

The MX20 and MX40 power inputs use standard spade terminals to connect the power supply. The ground terminal on the

power input must be connected to the power supply’s grounded chassis/enclosure. This connection is needed to insure

electromagnetic compliance and proper operation.

*Note: The MX20 and MX40 processors require approximately 3.5A @ 24VDC. We recommend

using a 24 VDC power supply capable of providing 3.5A current. The M-Series processor

runs most efficiently at this voltage which is commonly used in many manufacturing envi-

ronments.

Connect + terminal to Power Supply 10-30VDC*

Connect - terminal to Power Supply Minus

Connect Ground terminal to Power Supply Circuit Ground

123

Power Connector

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 133 134

Pas de commentaire

Datalogic M-Series Manuel d'instructions Page 23