Datalogic Controller SC6000 Manuel d'installation Page 50

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 78
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 49
BHS AND REDS INSTALLATION MANUAL
44
6
PS Line
6.2.4 Encoder Mounting
Both encoders must give the same information to the controllers at the same time, so some
precautions must be taken:
The Encoders must be mounted on the same belt.
The Encoders switch settings and wheel dimensions must be the same.
Make sure that both Encoder wheels have the correct touching pressure on the belt in
order to avoid detaching which produces speed differences.
Alternative Encoder Mounting
The secondary encoder is normally mounted to Profile #R7 in Figure 30. Profile #R16 can be
used as an alternative in case the encoders are mounted to the conveyor frame.
Figure 33 - Alternative REDS Encoder Mounting
Vue de la page 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 77 78

Commentaires sur ces manuels

Pas de commentaire