Datalogic Controller SC6000 Manuel d'installation télécharger pdf (Page 28)

BHS AND REDS INSTALLATION MANUAL

3.8 CABLE ROUTING

Cables having length in excess must be routed inside the PVC conduit and not rolled up

along the frame. Also the cables inside the PWO must be routed in a neat way and not rolled

up.

3.9 GROUNDING

In order to avoid any problem with electrical noise that could effect the correct working of the

system make sure that:

The AC Power cable coming inside the PWO is always provided with a Ground and

connected to the proper connector (PE).

The station frame where the scanners, controllers, encoders, photocell are mounted must

also be grounded to the PE terminal inside the PWO.

The Shields of the Encoder and Photocell cables must be connected to the proper

electrical terminal (PE).

Long cables routed inside the

PVC conduit.

Long cables must not be rolled-up inside the PWO.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 77 78

Pas de commentaire

Datalogic Controller SC6000 Manuel d'installation Page 28