Datalogic DX8200A Manuel d'installation télécharger pdf (Page 72)

DX8200A

Figure 58 – PackTrack™ System Layout

Working in PackTrack™ mode requires the presence of an encoder and a presence sensor

to track the moving packs.

All PackTrack™ functionalities are programmed via the Genius™ tool (refer to the Genius™

Help On-Line for details).

PackTrack uses a right-handed reference system (right hand with thumb = X axis; forefinger

= Y axis; middle finger = Z axis) where the X axis coincides with the PS line, the Y axis

coincides with the conveyor direction and the Z axis is oriented upwards from the conveyor

(see figure below).

This coordinate system is absolute for the reading station, i.e. is valid for all the scanners

independently from their position or orientation with respect to the conveyor. The arrows

point in the positive direction.

Conveyor direction

Conveyor

PS Line

Figure 59 – DX Scanner PackTrack™ Reference System

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 96 97

Pas de commentaire

Datalogic DX8200A Manuel d'installation Page 72