Datalogic Laser Barcode Reader DS4600A-2XX5 Manuel d'installation télécharger pdf (Page 41)

INSTALLATION

DS6300 9-pin Lonworks connector pinout

Pin Name Function

1 CHASSIS Cable shield internally connected by capacitor to chassis

9 VS Supply voltage - positive pin

2 GND Supply voltage - negative pin

6 VS_I/O Supply voltage of I/O circuit

3 Ref_I/O Reference voltage of I/O circuit

4 SYS_ENC_I/O System signal

5 SYS_I/O System signal

7 LON A Lonworks line (polarity insensitive)

8 LON B Lonworks line (polarity insensitive)

Network Termination

When building a Lonworks system the network must be properly terminated by positioning

BTK-6000 terminator in the DS6300 master reader and in the last DS6300 slave reader.

Each side of the terminator provides a different connector; thus, it can be inserted either into

the Lonworks 9-pin male connector of the master reader or in the Lonworks 9-pin female

connector of the last slave reader:

Slave

Master

Male

Female

Male

Figure 33 - BTK-6000 Network Terminator

NOTE

For Fieldbus models no terminator must be inserted in the reader, since it

is internally integrated.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 104 105

Pas de commentaire

Datalogic Laser Barcode Reader DS4600A-2XX5 Manuel d'installation Page 41