Datalogic DS2100N Manuel d'utilisateur télécharger pdf (Page 26)

Setup Procedure Using Programming Barcodes

2.2 FOR MATRIX 410 OR MATRIX 210 FAMILY READERS

For Matrix 410 or Matrix 210 readers

having software 6.10 or later, connected to either a

QL500 or a BM2x0 module (inside a CBX connection box), you can setup the CBX Ethernet

communication with programming barcodes.

Ì$CBETHD$-}Î

CBX Ethernet TCP/IP enabled

DHCP enabled

Using the X-PRESS™ interface setup functions described in the Quick Reference Guide,

correctly position the reader and read one of these barcodes with the Learn function

The reader can now communicate using CBX Ethernet TCP/IP.

For reader configuration through VisiSet™ using Ethernet TCP/IP, follow one of the

procedures in par. 2.3.

Ì$CBETHN$-\Î

CBX Ethernet TCP/IP enabled

DHCP disabled

(uses static IP Address parameters) *

The Factory Default static IP address parameter settings for CBX Ethernet TCP/IP for all

Matrix 410 or Matrix 210 readers are:

 IP Address = 172.24.24.1

 Subnet Mask = 255.255.0.0

 Gateway Address = 172.24.255.254

Except Matrix 210™ UHD models.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Pas de commentaire

Datalogic DS2100N Manuel d'utilisateur Page 26