Datalogic DX8200A-3010 Manuel d'installation télécharger pdf (Page 31)

INSTALLATION

X-axis Reference Point Stops

The 2 washers and 2 spacers can be mounted to the Reading Station Frame using Bosch T-

bolts and nuts to create 2 stops which can be used to facilitate DX8200A mounting and

positioning.

 During initial mounting, affix the stops in approximation to the mounting position. The

weight of the DX8200A can rest against this reference while the mounting bolts are being

set. This avoids having to hold and maneuver the scanner (especially for vertical side

mounted positions) while simultaneously affixing it to the frame.

 Once the scanner is correctly positioned for PackTrack, fix the stops against the scanner.

The stops remain fixed to the station frame so that the scanner can be replaced without

having to recalibrate the PackTrack coordinates. Referring to the figure above, the stop

provides a reference point for the X-axis while the scanner should be centered on the

frame to have a fixed reference for the Y-axis.

Create the stop by

using the washer,

spacer, t-bolt and nut.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 138 139

Pas de commentaire

Datalogic DX8200A-3010 Manuel d'installation Page 31