Datalogic Matrix 400 Manuel d'instructions télécharger pdf (Page 18)

MATRIX 400™ CODE QUALITY VERIFIER SOLUTION

9. After Focusing, tighten the Focus and Diaphragm Locking Knobs.

10. Swing the bracket D 90° as previously shown to replace the Lens Cover. Swing the

bracket D 90° returning to the reading position and fix the reader assembly (C+D) to the

illuminator assembly (A+B) with the remaining 2 M4 screws.

40 mm

code surface

Focus distance = α + β

The best results for this illuminator are obtained when α is approximately 25 mm (1").

The positioning slots on the brackets allow adjustment to obtain the best results between the

reader optimal focus distance and the illuminator optimal working distance. You can verify

the reading performance through VisiSet™.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 85 86

Pas de commentaire

Datalogic Matrix 400 Manuel d'instructions Page 18