Datalogic Reader Matrix-1000 Manuel d'utilisateur télécharger pdf

LT-100 CONE

LIGHTING SYSTEM

FOR MATRIX FAMILY READERS

DESCRIPTION

The LT-100 Cone Lighting System provides a circular symmetrical light

source designed for the following applications:

 with uneven or noisy background surfaces. By using LT-100 these

disturbances are suppressed and the code is highlighted.

 where dot peening or laser etching codes are directly marked onto

metal surfaces or PCBs and need to be highlighted.

 in the presence of highly reflective surfaces (metal, glass, etc.)

causing direct reflections.

MECHANICAL DIMENSIONS

58.1

[2.29]

140.0

[5.51]

PACKAGE CONTENTS

The LT-100 package contains the following items:

 LT-100 Cone Lighting System

 Matrix-1000/2000™ Mounting bracket

 (4) M2.5 screws for bracket mounting to cone

 (4) M4 screws for bracket mounting to reader

 (4+4) M2.5 locking and flat washers for bracket mounting to reader

 Instruction Manual

MOUNTING Matrix-1000/2000™

1. Mount the bracket A onto the LT-100 Cone B using the 4 M2.5

screws in the package.

2. Mount the reader onto the lighting cone assembly aligning it to the

correct holes according to the Focus Distance of the model used.

See

"Positioning" in the Matrix Reference Manual. Use the 4 M4

screws and washers in the package.

3. Wire the LT-100 to the CBX according to the Wiring table on the

opposite page.

4. Position the Matrix assembly over the code reading area at the

correct Focus Distance for your model, (described in the Matrix

Reference Manual under "Reading Features").

NOTE

Alternatively, the accessory BK-510 bracket can be

used to mount Matrix-1000/2000™ to the LT-100

Cone. This bracket provides slots to increase

positioning possibilities.

POSITIONING Matrix-1000/2000™

=99 mm

code surface

Focus distance = α + β

The best results for this illuminator are obtained when α is

approximately 20 mm (0.8"). However other Reading Distances

(described in the Matrix Reference Manual) can be used. You can

maximize the reading performance through VisiSet™.

[inch]

1 2

Résumé du contenu

Page 1 - FOR MATRIX FAMILY READERS

LT-100 CONE LIGHTING SYSTEM FOR MATRIX FAMILY READERS DESCRIPTION The LT-100 Cone Lighting System provides a circular symmetrical light sourc

Page 2

MOUNTING Matrix 400™ The following parts are required for mounting:  LT-100 Cone Lighting System  BK-4990 Matrix 400™ Generic LT Bracket 1. T

Plus de documents pour Mise en réseau Datalogic Reader Matrix-1000

Voir le document Datalogic Reader Matrix-1000 Manuel d'installation

Datalogic Reader Matrix-1000 Manuel d'installation (67 pages)

Voir le document Datalogic Reader Matrix-1000 Manuel d'utilisateur

Datalogic Reader Matrix-1000 Manuel d'utilisateur (2 pages)

Datalogic Reader Matrix-1000 Manuel d'utilisateur (82 pages)

Commentaires sur ces manuels

Pas de commentaire

Datalogic Reader Matrix-1000 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Mise en réseau Datalogic Reader Matrix-1000. LT-100 CONE LIGHTING SYSTEM FOR MATRIX FAMILY READERS [da] [en] [fr] [it] Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Mise en réseau Datalogic Reader Matrix-1000

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Datalogic Reader Matrix-1000